Ningbo Yinzhou Anshi Electric Plastics Factory
Main products:pressure control,pressure switch,float switch
Products
Contact Us
  • Contact Person : Mr. Lee Edward
  • Company Name : Ningbo Yinzhou Anshi Electric Plastics Factory
  • Tel : 86-574-88428099
  • Fax : 86-574-88293217
  • Address : Zhejiang,NingBo,No.46 Huang Gulin Road, Gulin Town,YinZhou District, NingBo
  • Country/Region : China
  • Zip : 315177

water storage tank

water storage tank
Product Detailed
Related Categories:Pressure Switches
Related Product Searches:water storage tank,High Quality,water storage tank,DSK-8
water storage tank CE and TUV certificates Start and stop water pump automatically

water storage tank

Descriptions:

Start and stop water pump automatically according to the pressure and water storage

 

1.       Rate voltage: 220-240V, 110-120V

2.       Max. Current:10A

3.       Frequency: 50HZ-60HZ

4.       Max. power:1.1KW

5.       Joint screw: G1

6.       protection Garde: IP65 PC-13

7.       starting pressure to choose:1.5bar or 2.2bar

The product can replace the complicated installations of automatic water pump e.g. pressure gauge,pressure switch, T-valve, check valve and pressure tank). It has the features of stable performace, low maintenance and long life etc, it will indicate the pump has started when the green light Power on lights up after connecting the power.    When the yellow light Pump on lights up, it indicates the pump has been started. The pump continues to operate for a few minutes enabling the system to fill in the pipes and to reach the required pressure. If this lapse is insufficient, the red light failure will light up. In this event, keep the Restart button pressed and wait, with a tap opened till the red light is off. Once released the button and closed the tap, the product will keep the pump at its maximum pressure..

 

Function:

The product is designed especially for all control operation of automatic water pump. If the particular breakdowns occur, suction pipe etc, the product recognizes the breakdowns and the red light failure lights up,at the same a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing the restartbutton. The controller can ensure a constant pressure for the water supplying system and thus reduce the water hammer effect inside pipeline during water delivering. The controller also posesses the features of reset after power failure. Its starting flow is about 36-60L/h and is convenient for home application.

water storage tank



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.